2 place Colbert 83120 Sainte-Maxime
0422731500
magali.montrichard@avocazur.com

How to Create Your Own Dog Mask – The Fundamentals

Magali Montrichard est avocate au barreau de Draguignan (83)

How to Create Your Own Dog Mask – The Fundamentals

In this article we’re going to look at how to make your own dog mask. We’ll cover the basics and then go on to look at some of the more advanced tips and tricks which you can use.

If you have a dog that likes to bark, and particularly if your dog loves to play in the garden and other regions of the home, you will need to get them some particular dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the first part of the set-up that will look a little scary at first, but it’s really very simple. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape out of the cardboard, so you will have to cut around the edge of the mask so you get something which resembles a cone. The main thing here is to be realistic with what type of paper plate that you’re using.

Then you will have to wrap the cardboard around the edges of the paper plate, making certain there is a good seal between the two pieces so that you can ensure that nothing will leak once you put the mask on. Make sure that the edges are cut so the edges aren’t sharp, as this may damage the edges of the mask.

Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making certain it runs smoothly and evenly across the whole mask. You’ll want to start with one side of the mask first, so you can work your way round it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it is best that you leave about one-third of an inch of paint on the edges so that it runs across the cardboard.

Don’t worry too much about the paint getting stuck to your mask. It’s easy to eliminate it later, and it will leave you with a nice finished mask to show off to everyone! It’s also a good idea to wipe away any excess paint after you are dog filter mask done, so you don’t wind up with smudges or smears on your dog.

Then it’s time to paste the mask on your dog’s head. First you will need to make sure that you get a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it is secure, then you may begin to glue the mask on the dog’s face. Take the piece of cardboard that is used for the base of the mask and fold it over. Make certain it’s quite powerful and then use your hands to ensure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds until you’ve got the mask snugged securely onto the surface of your dog. Do not make the folds too large or else it could look messy. As soon as you’ve done this, you can then take out the mask and then attach the cardboard ears. And attach the other part of the mask onto the dog. Make certain the ears are flat and make certain it is not too short or long as this can cause some problems with the mask slipping off the dog’s face.

If you’re using a dog mask because your pet security, you’ll have to do some sanding to be certain it is secure on your dog. You can accomplish this by sanding off any excess paper that may have been removed from your mask.

Laisser un commentaire

Votre adresse de messagerie ne sera pas publiée. Les champs obligatoires sont indiqués avec *